User Tools

Site Tools


comware:s3600-si

CPU

CPU type        : BCM4704

Switch-Fabric

bus dev fn venID devID class  rev MBAR0    MBAR1    IPIN ILINE
01  01  00 14e4  5655  028000 12  a8100004 00000000 01   04

Running other firmware

  1. S3152_E-CMW310-R1702P42-S168.bin
            Board checking........................LSJ1LTSD
            SDRAM fast selftest........................OK!
            Flash fast selftest........................OK!
            CPLD selftest..............................OK!
            Switch chip selftest.......................OK!
            Port 1 has no module   

            Port 2 has no module   

            Port 3 has no module   

            Port 4 has 1000_BASE_T_AN_SFP module  

            PHY selftest...............................OK!
            Please check port leds...............FINISHED!


User interface aux0 is available.



Press ENTER to get started.
<4500>dis ver
Huawei Versatile Routing Platform Software.
VRP Software, Version 3.10, Release 1702P42
Copyright (c) 1998-2012 Huawei Technologies Co., Ltd. All rights reserved.
Quidway S3952P-SI uptime is 0 week, 0 day, 0 hour, 1 minute

Quidway S3952P-SI with 1 Processor
64M     bytes DRAM
8196K   bytes Flash Memory
Config Register points to FLASH

Software Encryption Mode is 3DES
Hardware Version is REV.C 
CPLD Version is CPLD 001
Bootrom Version is 4.06
[Subslot 0] 48 FE Hardware Version is REV.C 
[Subslot 1] 4 GE  Hardware Version is REV.C 

<4500>
Enter your choice(0-9): 

1. Set TFTP protocol parameters
2. Set FTP protocol parameters
0. Return to boot menu

Enter your choice(0-3): 1
Load File name           :S31SI_E-CMW310-R2215P11.bin  
Switch IP address        :172.24.254.120  
Server IP address        :172.24.254.103  
Are you sure you want to download file to RAM and run? Yes or No[Y/N] y
Loading............................................................................done
Decompress Image................................................................................................................................................................................................................................................................................................................................................................................OK!
Starting at 0x80100000...
----------------------------------------------------
(/root/) C-Kermit>set speed 9600 
/dev/ttyS1, 9600 bps
(/root/) C-Kermit>connect
Connecting to /dev/ttyS1, speed 9600
 Escape character: Ctrl-\ (ASCII 28, FS): enabled
Type the escape character followed by C to get back,
or followed by ? to see other options.
----------------------------------------------------
@
 equipdata read BAD!  
$$

            Board checking......................LS41LTSGD0
            SDRAM fast selftest........................OK!
            Flash fast selftest........................OK!
            Switch chip selftest...................FAILED!
            Slot 1/1/1 has no module  
            Slot 1/2/1 has no module  
            PHY selftest..............................BAD!
            Please check port leds...............FINISHED!


Press any key to stop start command...04:58:00
*silence*
  1. S3600EI-CMW310-R1702P38-S168.bin
Decompress Image................................................................................................................................................................................................................................................................................................................................................................................................................................OK!
Starting at 0x80100000...

System will reboot, because the software does not match with the hardware!

Boot-loader interestings

      ******************************************************************
      *                                                                *
      *     SuperStack 3 Switch 4500 50-Port BOOTROM, Version 1.01     *
      *                                                                *
      ******************************************************************

      Copyright (c) 2004-2006 3Com Corporation and its licensors.
      Creation date   : Apr 19 2006, 12:50:28
      CPU type        : BCM4704
      CPU Clock Speed : 200MHz
      BUS Clock Speed : 33MHz
      Memory Size     : 64MB

      Mac Address     : 0016e02db460


Press Ctrl-B to enter Boot Menu... 1

password:


        BOOT  MENU

1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot

Enter your choice(0-9): <CTRL-D><enter>
Enter debugging environment

                            VxWorks System Boot


Copyright 1984-2001  Wind River Systems, Inc.





CPU: BCM4704 (MIPS32)
Board:  JAG

Version: VxWorks5.4.2
BSP version: 1.0/0
Creation date: Apr 19 2006, 12:50:28


Press any key to stop auto-boot...
  5

[VxWorks Boot]: [VxWorks Boot]: ?

 ?                     - print this list
 @                     - boot using active boot string
 <n>                   - boot using boot string <n> = 0 to 2
 b [<n>]               - show/change which boot string is active
 P                     - show devices on the PCI bus
 Z [w:x:y:z]           - show/set the time zone
 M [xx:xx:xx:xx:xx:xx] - show/set the MAC address
 Z [w:x:y:z]           - show/set the time zone
 R                     - reboot
 T addr, nbytes        - test memory
 X | x                 - boot over serial port using xmodem
 C                     - clear NVRAM
 p                     - print boot params
 c                     - change boot params
 l                     - load boot file using active boot string
 g adrs                - go to adrs
 d adrs[,n]            - display memory
 m adrs                - modify memory
 f adrs, nbytes, value - fill memory
 t adrs, adrs, nbytes  - copy memory
 e                     - print fatal exception
 n netif               - print network interface device address
 $dev(0,procnum)host:/file h=# e=# b=# g=# u=usr [pw=passwd] f=# 
                           tn=targetname s=script o=other 
 Boot flags:           
   0x02  - load local system symbols 
   0x04  - don't autoboot 
   0x08  - quick autoboot (no countdown) 
   0x20  - disable login security 
   0x40  - use bootp to get boot parameters 
   0x80  - use tftp to get boot image 
   0x100 - use proxy arp 

available boot devices:Enhanced Network Devices
 netdrv0
[VxWorks Boot]: p

boot device          : netdrv
unit number          : 0 
processor number     : 0 
host name            : S3900
file name            : all_flash.app
inet on ethernet (e) : 10.153.106.2
host inet (h)        : 10.153.106.86
user (u)             : a
ftp password (pw)    : a
flags (f)            : 0x80 

[VxWorks Boot]: P
Using configuration mechanism 0
Scanning function 0 of PCI busses 1-1, devices 0-14
bus dev fn venID devID class  rev MBAR0    MBAR1    IPIN ILINE
01  00  00 14e4  4704  060000 09  a8004000 a0000008 01   01
01  01  00 14e4  5655  028000 12  a8100004 00000000 01   04
comware/s3600-si.txt · Last modified: 2013/11/19 16:51 by admin